Flow Meter TCS 700-15

Description

TCS 700-15

The 700 1.5″ rotary flow meter is engineered to meter liquid at up to 60 GPM (227 LPM).

The TCS 700-15 rotary flow meter combines excellent accuracy with low pressure drop.  The TCS 700-15 rotary flow meter has a compact size and lightweight design that offers minimal maintenance and long service life.  This meter is built with advanced materials of construction for a broad range of measurement applications and is accompanied by a full selection of accessories and electronic registration.

The TCS 700 series rotary flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact within the chamber, eliminates any deterioration in accuracy and provides a long service life.

The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, giving a consistent and superior measurement of accuracy.

Specification

• Flow: Capable of up to 60 GPM (227 LPM);  Bi-directional Flow
• Flange Connections: 1 1/2” NPT Flange; 1” & 2” Options
• Linear Accuracy: Capable of ± 0.15% of over the full flow range
• Repeatability: Capable of 0.02% (constant operation conditions with 700SP meters & mechanical registration, using 1 CPS test fluid)
• Viscosity: Will accurately measure liquids up to 1,500,000 SSU (325,000 CPS)
• Working Pressure: 150 PSI (10.5 BAR)
• Working Temperature: – 40 to 160°F (- 40 to 71°C)

Meter Types

•  700 IC – Industrial Products Carbon Bearings Materials of Construction: Anodized Aluminum, Stainless Steel, Carbon Graphite, Treated Stainless Steel, Ni-Resist, Simriz*, PTF For metering Alcohols, Chemicals, Solvents, Water and many other Non-Lubricating Liquids such as Acetones, Ethanol, Naphta, Xylene, MEK, Toluene, Resins, etc.
• 700 IP – Industrial Products Stainless Steel Bearings  Materials of Construction: Anodized Aluminum, Stainless Steel, Treated Stainless Steel, Ni-Resist, Simriz*, PTFE For Food Processing, Chemicals, General Solvents and many other liquids such as Corn Syrup, Soy Bean Oil, Liquid Sugars, Shortenings, Latex Products, Adhesives, etc.
• 700 SP – Standard Petroleum Meters  Materials of Construction: Anodized Aluminum, Stainless Steel, Treated Stainless Steel, Ni-Resist, FKM For metering refined petroleum products such as Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.
• 700 SPA – Standard Petroleum Aviation  Materials of Construction: Anodized Aluminum, Stainless Steel, Carbon Graphite, Treated Stainless Steel, Ni-Resist, FKM For metering refined petroleum products such as Aviation Gasoline, Jet Fuels, Ethanol, Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.

Download Katalog TCS 700 series