Showing 91–99 of 185 results
Graco Husky 205
Specification Graco Husky 205 Air-Operated Diaphragm Pump
- Maximum fluid working pressure 100 psi
- Maximum/minimum air pressure 100 psi/20 psi
- Maximum fluid flow 5.0 gpm
- Maximum pump speed 320 (dry) cpm, 250 (wet) cpm
- Volume per stroke* 0.006 g
- Volume per cycle* 0.012 g
- Maximum suction lift dry 8 to 10 ft
- Maximum size pumpable solids 0.06 in
- Maximum operating temperature 180°F
- Maximum air consumption 9.0 scfm
Graco Husky 2150
Graco Husky 2150 Air-Operated Diaphragm Pump
- Maximum fluid working pressure 120 psi
- Air pressure operating range 20-120 psi
- Maximum air consumption 175 scfm (see instruction manual chart)
- Air consumption at 70 psi (0.48 MPa, 4.8 bar)/60 gpm 60 scfm (see instruction manual chart)
- Maximum free-flow delivery 150 gpm
- Maximum pump speed 145 cpm
- Gallons (liters) per cycle 1.03 gal
- Maximum suction lift 18 ft wet or dry
- Maximum size pumpable solids 1/4 in
- Maximum noise level* at 100 psi (7.0 bar, 0.7 MPa) and 50 cpm 90 dBa
Graco Husky 307
Acetal and Polypropylene Husky 307 Air-Operated Diaphragm Pumps with PTFE Diaphragms
- Maximum fluid working pressure 100 psi
- Air pressure operating range 20 to 100 psi
- Maximum air consumption 5.5 scfm (see chart in instruction manual)
- Maximum free-flow delivery 6.5 gpm
- Maximum pump speed 330 cpm
- Maximum suction lift 7 ft dry, 12 ft wet
- Maximum size pumpable solids 1/16 in
Acetal and Polypropylene Husky 307 Air-Operated Diaphragm Pumps with TPE or Buna-N Diaphragms
- Maximum fluid working pressure 100 psi
- Air pressure operating range 20 to 100 psi
- Maximum air consumption 5.5 scfm (see chart in instruction manual)
- Maximum free-flow delivery 7 gpm
- Maximum pump speed 330 cpm
- Maximum suction lift 12 ft dry, 21 ft wet
- Maximum size pumpable solids 1/16 in
Graco Husky 3300
Graco Husky 3300 Air-Operated Diaphragm Pump
- Aluminum or Stainless Steel with Aluminum Center Section 125 psi
- Polypropylene or Stainless Steel with Polypropylene Center Section 100 psi Air pressure operating range
- Aluminum or Stainless Steel with Aluminum Center Section 20-125 psi
- Polypropylene or Stainless Steel with Polypropylene Center Section 20-100 psi Air consumption
- All pumps 90 scfm at 70 psi, 100 gpm
- Aluminum or Stainless Steel with Aluminum Center Section 335 scfm
- Aluminum or Stainless Steel with Aluminum Center Section 335 scfm
- Polypropylene or Stainless Steel with Polypropylene Center Section 275 scfm
Graco Husky 515
Graco Husky 515 Air-Operated Diaphragm Pumps
- Maximum Fluid Working Pressure 100 psi
- Air Pressure Operating Range 30 to 100 psi
- Maximum air consumption 28 scfm
- Maximum free-flow delivery 15 gpm
- Maximum pump speed 400 cpm
- Gallons (Liters) per cycle 0.04
- Maximum suction lift (water with buna balls) 15 ft dry, 25 ft wet
- Maximum size pumpable solids 3/32 in
Graco Husky 716
FEATURES
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Graco Mini Fireball 225
50:1 Mini Fire-Ball 225 Grease Pump
- Maximum Fluid Working Pressure : 8400 psi
- Maximum Air Inlet Pressure : 140 psi
- Ratio : 50:1
- Pump Cycles : 130/lb
- Maximum recommended pump speed : 100 cycles/min
- Recommended pump speed for continuous operation : 60 cycles/min
- Maximum Delivery : 56 lb/min at 60 cycles/min
- Stroke Length : 2.0 in
- Maximum Pump Operating Temperature : 130 °F
- Air Inlet Size : 3/8 npt (f)
- Fluid Outlet Size : 1/4 npt (f)
- Wetted Parts : Carbon steel; zinc plating; brass; polyurethane; ultra-high molecular weight polyethylene; Buna-N
- Sound Pressure Level (measured 1 meter from unit) : 77.8 db(A) @ 140 psi, 100 cpm
- Sound Power Level (tested in accordance with ISO 9614–2) : 85.6 dB(A) @ 140 psi, 100 cpm
- Approximate Weight : 15 lbs
Graco Transfer Pumps
T1, T2 and T3 Transfer Pumps Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
Graco’s family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.
FEATURES
- Provide consistent feed pressures and flow rates for dependable results
- Lower pressure drops with higher viscosity materials at any ambient temperature
- Designed and manufactured by the worldwide leader in pump technology
- Longer lasting pump – designed for durability with less maintenance
- Quick-release bung adapter for easy drum removal without interference from hose connections
- Stainless steel wetted parts for corrosion-resistance
- PTFE seals for improved performance and less maintenance
T2 2:1 Ratio Transfer Pump
- Maximum Fluid Working Pressure* 405 psi
- Pressure Ratio 2.25:1
- Max Output Flow (continuous) 5.0 GPM
- Max Output Flow (intermittent) 7.5 GPM
- Maximum Air inlet pressure 180 psi
- Pump cycles per 1 gallon (3.8 liters) 15.9
- Maximum recommended pump speed for continuous operation 100 cycles per min (150 cycles per min intermittent)
- Gallons (liters) per pump cycle 0.063 gal.
- Air consumption See performance chart
- Maximum Fluid Temperature 190° F
- Maximum Ambient temperature 120° F
- Air Inlet Port 1/4 npt(f)
- Fluid Outlet Port 3/4 npt(f)
Koshin CHANGE MASTER
Specifications Koshin Model GM-2524H
- Dia of Hose Inlet : 25 mm (1”)
- Dia of Hose Outlet : 20 mm (3/4”)
- Connection Thread : Inner Pipe Thread
- Max Delivery Pressure : 0.2 Mpa (2 kgf/cm2)
- Delivery Volume : 20 L/min (5 USG/min)
- Applicable Viscosity : 800 cst
- Voltage : DC 24 V
- Rated Current : 16 A
- Output : 200 W
- Revolution : 6200 rpm
- Rating : 25 min
Hubungi kami untuk informasi Harga dan ketersediaan Produk
